001 | Antošová Z., Arhens B., Pech J.: Axisymmetric Jet under Active Control by Coaxial Synthetic Jet |
002 | Belda M., Hlavatý T., Isoz M., Hyhlík T: On the Choice of the Higher Order DMD Mode Part for Projection to Physical Coordinates |
003 | Bílek V., Gebouský O., Haidl J., Pivokonský M.: CFD Simulation Methodology for Stirred Vessels Validated by Particle Tracking Velocimetry |
004 | Bodnár T., Linkeová I., Pirkl L.: Design and Numerical Simulation of an Axial Blood Pump |
005 | Caggio M., Schmid M., Valášek J., Nečasová Š., Bodnár T., Starynskyi O.: Aeroacoustic Simulations in Thermally Non-Homogeneous Fluid Flows |
006 | Cejpek O., Malý M., Hájek J., Jedelský J. : Impinging Effervescent Atomizers: Design Insights |
007 | Dimitrieva N. F.: Vortices Inside a Ventilated Cavity |
008 | Dirkes N., Behr M.: On the Significance of Flow Vorticity for Hemolysis Modeling |
009 | Duda D., Yanovych V., Uruba V.: Example of Repeatability Issue in a Wind Tunnel Experiment Measured by PIV |
010 | Flídr E., Flídrová A.: Visualization of Dantec 55P11 Hot-Wire Probes under an Electron Microscope |
011 | Fürst J.: Locally Optimized Virial Equation for CFD Simulations of Real Gas Flows |
012 | Galusinski C., Lyubimova T. P., Meradji S.: 3D Unsteady Motion and Deformation of a Gas Bubble in Vibrating Liquid under Zero Gravity |
013 | Hájek J., Malý M., Cejpek O., Jedelský J.: Nebulizer Based Devices for Fine Nanoparticle Coating |
014 | Halada T., Beneš L.: A Stable Smoothed Particle Hydrodynamics Scheme: Application on Free Surface Flows with Open Boundaries |
015 | Hlavatý T., Rýc J., Isoz M., Sluková M., Moucha T.: Development and Sensitivity Analysis of CFD-Based Bread Baking Model |
016 | Holman J.: Comparison of Different Limiters in MUSCL Reconstruction for the Numerical Solution of Compressible Flow |
017 | Isoz M., Studeník O., Plachá M., Hlavatý T.: Simulations Suggest a Strong Impact of Soot Stickiness on Catalytic Filter Performance |
018 | Khýr M., Isoz M., Plachá M.: Artificial Intelligence for Simulation of Soot Deposits: from 2D to 3D Estimates |
019 | Kořínek T., Kahraman M. C., Škarohlíd J., Škoda R.: Molten Salt Freeze Valve Operation: Experimental Study |
020 | Kreuzová T., Šafařík P., Šimurda D., Luxa M., Škach R.:: Data Reduction Methods in Turbomachinery Linear Blade Cascade Experiment |
021 | Kubíčková L., Studeník O., Plachá M., Isoz M.: Improving QCM Biosensor Efficiency by Flow Cell Modification |
022 | Malý M., Cejpek O., Hájek J., Jedelský J.: POD Analysis of Stable and Unstable Effervescent Spray |
023 | Meriç M., Hrubý J.: Determination of Opening and Closing Times of a Pilot Operated Hung-Type Diaphragm Valve Based on Pressure Difference: Combining Experimental Results and Mathematical Model |
024 | Meziane A., Yahi F., Benbrik A.: Numerical Investigation of Bi-Dimensional Flow in a Rotating Spherical Lid-Driven Cylindrical Cavity |
025 | Novosad P., Malý M., Cejpek O., Hájek J., Hájek O., Jedelský J.: Computationally Viable Approach to Twin-Fluid Internal Mixing Atomizer Modeling |
026 | Procházka P., Uruba V., Brůha T.: Frequency Analysis of the Wake Behind a Baffle in the PBT Mixing Vessel |
027 | Richter K., Probst T., Hundertmark A.: Simulation of Compliance in a Human Carotid Artery with Resistance Boundary Conditions |
028 | Rozumnuk N., Baskova O., Kravchenko V., Baskova G.: Features of the Vortex Structures in Cavities of Different Depth |
029 | Shkvar Y., Kandume J.: Turbulent Flow Control by a Combination of a Dimpled Surface, Blowing and a Synthetic Jet Inside the Dimples |
030 | Studeník O., Kubíčková L., Kočí P., Isoz M.: Species Transport Immersed Boundary Solver for QCM Biosensor: Initial Developments |
031 | Tigrine Z., Yahi F., Lecheheb S., Mokhtari F., Bouabdallah A.: Hydrodynamic Instabilities in Spherical Couette Flow with Free Surface Effects: Experiments and Simulations |
032 | Trávníček Z., Antošová Z., Wang A.-B.: Bio-Inspired Synthetic Jet Actuator with Piezoelectrically Driven Nozzle with Oscillating Cross Section Area |
033 | Uruba V., Procházka P.: On Dynamics of the Wake Behind a Wall Mounted Finite Length Cylinder |
034 | Vacek K., Sváček P.: On Flutter Analysis by the Finite Element Method Using Taylor-Hood and Scott-Vogelius Elements |
035 | Valášek J., Hubálek J.: Coupled Vibroacoustic Problem Inspired by Human Phonation |
036 | Varnhorn W.: An Approximation Procedure for Steady Navier – Stokes Flow |
037 | Yahi F., Meziane A., Hamnoune Y., Merabet N., Azril N., Talamali A., Zemouri A.: Numerical Study of Characteristics and Cavitation Phenomena in a Centrifugal Pump Impeller |
038 | Yanovych V., Tsymbalyuk V., Duda D., Uruba V., Klimko M.: Effect of Blade Vibrations on Turbulence Structure |